Saxon Parts – Terms, Conditions and Privacy
1. GENERAL
By accessing this website and/or placing an order with Saxon Parts B.V. i.o. (hereinafter referred to as “Saxon Parts”)
the customer agrees to these Terms & Conditions. Saxon Parts. reserves the right to amend these Terms & Conditions
at any time without prior notice.
The latest published version on the website shall apply.
By making payment of any invoice, quotation, deposit, order, or service issued by Saxon Parts, the customer
expressly confirms that they have read, understood, and accepted the latest version of the Saxon Parts
Terms & Conditions published on the website at the time of payment. No separate signature shall be required
for these Terms & Conditions to become legally binding.
The websites kugelfischer.nl, ferrari-parts.nl, and bmwclassicparts.nl operate under the commercial and invoicing
entity Saxon Parts.
All sales, repairs, quotations, invoices, shipments, and agreements are exclusively subject to the Saxon Parts Terms
& Conditions.
2. MOTORSPORT / OFF-ROAD USE
Unless explicitly stated otherwise in writing, all products sold by Saxon Parts are intended and sold strictly for
motorsport, racing, competition, off-road, prototype, or show (concourse) use only. Products may not comply with local
road-use regulations, emissions standards, safety requirements, homologation rules, or inspection requirements
applicable in the customer’s country. The customer is solely responsible for determining whether products may
legally or safely be installed or used on public roads or specific vehicles.
3. PRODUCT INFORMATION & FITMENT
All descriptions, specifications, photographs, OEM references, compatibility information, VIN/chassis references,
and technical information are provided for general informational purposes only (website, social media, phone, digitally,
email, quote, invoice)
Pictures shown may not represent the exact item supplied. Compatibility, fitment, software compatibility, coding
requirements, and intended application remain solely the customer’s responsibility. The customer remains fully responsible
for verifying, fitment, compatibility, OEM reference numbers, VIN/chassis applicability, and intended use prior to purchase
and installation.
4. TECHNICAL GUIDANCE DISCLAIMER
Any advice, recommendation, setup information, tuning guidance, or technical assistance provided by Saxon Parts is
non-binding and intended solely for general informational purposes. Saxon Parts does not guarantee the accuracy,
completeness, or suitability of such information for any specific vehicle or application. Customers are strongly
advised to consult a qualified specialist or professional mechanic before installation or use.
No rights can be derived from these, unless expressly agreed otherwise in writing.
5. WARRANTY DISCLAIMER
Unless explicitly stated otherwise on the invoice as “new & warranty”, all products are sold strictly “as is”, “with all
faults”, and without any express or implied warranty. Saxon Parts expressly disclaims all implied warranties
including merchantability, fitness for a particular purpose, compatibility, durability, road legality, emissions
compliance, or performance. Used, rebuilt, refurbished, custom-made, motorsport, racing, fuel-system, and
electrical/electronic products are sold without warranty unless explicitly agreed otherwise in writing.
Used parts may show cosmetic wear, unknown mileage, prior race usage, or signs of previous installation.
6. RETURNS & CANCELLATIONS
Custom-built, made-to-order, special-order, motorsport, racing, fuel-system, electrical, electronic, ECU, module,
sensor, coding-related, refurbished, rebuilt, and used products are non-returnable and non-refundable unless
otherwise required by mandatory law. Electrical and electronic products cannot be returned once installed,
programmed, connected, modified, or supplied.
By placing an order, the customer expressly acknowledges that products designated as custom-built, made-to-order,
motorsport or special-order are procured specifically for that order and are excluded from cancellation and return
rights to the extent permitted by applicable law.
Returns are accepted only with prior written authorization from
Saxon Parts. Authorized returns may be subject to restocking fees and must be returned at the customer’s expense.
6.1 Stock Availability, Procurement and Manufacture – Business Customers
All orders placed by business customers are subject to stock verification. If, following receipt of an order,
Saxon Parts discovers that an ordered item is not available from its own stock, Saxon Parts reserves the right to
procure the item from a third-party supplier or arrange for the item to be manufactured specifically to fulfil the order.
The business customer expressly acknowledges and agrees that the subsequent procurement or manufacture of such
item constitutes fulfilment of the original order. The fact that an item is unavailable from stock at the time of
stock verification shall not entitle the business customer to cancel the order, reject the item, or demand a credit
note or full or partial refund of the invoice amount solely on the grounds of such unavailability.
The business customer remains bound by the original order and its payment obligations, subject to the agreed
terms and conditions. Any revised delivery time resulting from procurement or manufacture shall be communicated
where reasonably practicable.
This clause applies exclusively to business customers acting in the course of their trade or business and shall be
interpreted in accordance with the applicable law and the other provisions of these Terms and Conditions.
7. INSTALLATION & LIABILITY
Installation and use of all products are entirely at the customer’s own risk. Saxon Parts shall not be liable for
damage resulting from improper installation, incorrect tuning, software calibration, coding issues, inadequate
lubrication, insufficient cooling, improper torque procedures, misuse, racing conditions, or use outside
manufacturer specifications. Saxon Parts shall not be liable for any direct, indirect, incidental, consequential, or
special damages including engine damage, drivetrain failure, vehicle damage, loss of profits, labor costs, towing
costs, injury, death, race incidents, or third-party claims.
8. PRICING & AVAILABILITY
All prices are stated in Euro (€) unless otherwise specified. Prices, specifications, and availability may change
without prior notice. Saxon Parts reserves the right to correct pricing errors, typographical mistakes, inaccurate
product information, or stock discrepancies.
9. PAYMENT & LEAD TIMES
Unless expressly agreed otherwise in writing, payment in full and in advance is required at all times. No goods,
products, repaired items, serviced items, or completed work shall be released, shipped, collected, delivered, or
returned until full cleared payment has been received by Saxon Parts.
Where Saxon Parts expressly agrees to deferred payment or payment on account, the applicable payment term
shall be stated on the relevant quotation or invoice. Unless otherwise agreed in writing, invoices shall be payable
within 14 calendar days from the invoice date.
In the event of late payment, the customer shall be in default in accordance with applicable Dutch law.
Saxon Parts shall be entitled to charge statutory interest on overdue amounts. For business customers (B2B),
statutory commercial interest shall apply where legally applicable.
Business customers (B2B): All extrajudicial collection costs incurred in recovering overdue amounts shall be
payable by the customer, in accordance with the Dutch legislation on extrajudicial collection costs
(Wet Incassokosten – WIK), unless otherwise agreed in writing. A separate statutory 14-day payment notice is
not required for business customers, provided the customer is legally in default.
Private consumers (B2C): Extrajudicial collection costs shall only be charged in accordance with applicable
consumer protection legislation. Before such costs become due, Saxon Parts shall send a free written payment
notice granting the consumer at least 14 days to pay, calculated from the day following receipt of the notice,
in accordance with the Dutch WIK.
Saxon Parts reserves the right to suspend further deliveries, orders, repairs, services, or ongoing work in the
event of overdue invoices.
Following full payment, Saxon Parts will make reasonable efforts to dispatch goods as soon as reasonably
possible. Lead times (production) are estimates only and may vary depending on supplier availability,
manufacturing schedules, transport conditions, customs procedures, workload, and third-party delays.
Made-to-order, custom-built, special-order, assembled, fabricated, refurbished, repaired, or crate-prepared
products may require additional production, preparation, testing, packaging, repair, inspection, or crating time
prior to shipment. Where wooden crating, export packaging, palletizing, or special transport preparation is
required, additional lead time shall apply.
Deposits, reservations, and pre-payments are non-refundable if the customer fails to complete the transaction,
except where mandatory applicable law provides otherwise.
Fraudulent chargebacks, unauthorized payment disputes, or false delivery claims may result in debt
collection and legal action.
10. SHIPPING & INTERNATIONAL SALES
Shipping costs, customs duties, VAT, import taxes, brokerage fees, insurance, and related charges are the
customer’s responsibility unless explicitly agreed otherwise. The customer acts as importer of record unless
agreed otherwise in writing. International shipments may be supplied under EXW, DAP or other agreed
Incoterms®. Risk of loss, delay, theft, customs seizure, or transport damage transfers to the customer upon
shipment or carrier collection. Customers are responsible for arranging transport insurance where required.
11. RETENTION OF TITLE
Ownership of all goods remains with Saxon Parts until full payment of all invoices, shipping costs, taxes, and
related charges has been received.
12. B2B & CONSUMER SALES
Business customers acknowledge that purchases are made for professional or commercial purposes. Nothing in
these Terms excludes mandatory statutory rights granted to consumers under applicable law. Where legally
permitted, liability limitations and warranty exclusions shall apply to the maximum extent permitted by law.
Any goods delivered to Saxon Parts for inspection, repair, refurbishment, modification, testing, storage or
any other service are received and held entirely at the customer’s risk. Unless expressly agreed otherwise in
writing, Saxon Parts does not maintain insurance coverage for such goods against theft, loss, fire, water
damage, vandalism, accidental damage or any other cause. Customers are solely responsible for obtaining
and maintaining adequate insurance coverage for their goods during transportation to and from the Saxon Parts
and for the entire period such goods remain in Saxon Part’s possession, custody or control.
13. REPRODUCTION & CUSTOM-MADE PARTS
Many parts supplied by Saxon Parts are reproduction parts, remanufactured parts, Motorsport parts, or parts
produced in small series. Vehicle manufacturers such as Ferrari, BMW, and others often introduced undocumented
production changes during a model’s production run (street and race cars). As a result, it is not always possible to
determine the exact specification applicable to every vehicle.
The customer acknowledges that minor modifications, adjustments, fitting work, or the use of alternative
components may be required during installation. Examples include, but are not limited to, the use of reducers,
adapters, alternative hose diameters, modified fasteners, or minor fabrication work where original components
are no longer available.
The customer is solely responsible for verifying compatibility and suitability prior to installation.
Due to the custom-made nature of these products and the possibility of required fitting adjustments,
reproduction parts, made-to-order parts, custom-manufactured parts, and specially sourced parts are
non-returnable and non-refundable, unless defective due to a manufacturing fault.
Installation costs, modification costs, workshop time, transport costs, and any consequential damages are
expressly excluded from any claim against Saxon Parts.
Parts that have been installed, test-fitted, modified, painted, coated, welded, machined, or otherwise
altered cannot be returned under any circumstances.
14. VEHICLE BROKERAGE 7 INTERMEDIATION
14.1 Role of Saxon Parts
Saxon Parts acts exclusively as an independent intermediary (broker) in connection with the purchase and
sale of motor vehicles.
Saxon Parts does not act as the owner, seller or purchaser of the vehicles concerned and does not acquire
legal title to such vehicles through its brokerage activities.
The actual vehicle purchase agreement shall be concluded directly between the buyer and the seller.
Saxon Parts is not a contracting party to the vehicle purchase agreement and shall not be considered the
seller or purchaser of the vehicle.
Saxon Parts shall not have authority to conclude a purchase or sale agreement on behalf of either party
unless expressly authorised in writing.
14.2 Vehicle Brokerage Agreement
Each vehicle brokerage assignment shall, where applicable, be subject to a separate written
Vehicle Brokerage Agreement between Saxon Parts and the relevant client.
The Vehicle Brokerage Agreement shall specify, as applicable:
- The vehicle concerned, including make, model and chassis number (VIN).
- The identity and role of the client (buyer, seller or both).
- The scope of the brokerage services provided by Saxon Parts.
- The agreed brokerage commission, fee or other remuneration.
- Which party or parties are responsible for paying the commission.
- The amount or calculation method of the commission.
- The circumstances under which the commission becomes due and payable.
- Any additional expenses, services or specific arrangements agreed between the parties.
The Vehicle Brokerage Agreement shall form the basis of the individual brokerage assignment and shall
supplement these Terms & Conditions.
In the event of any conflict between a specific written agreement and these Terms & Conditions, the
specific written agreement shall prevail in relation to the relevant brokerage assignment.
14.3 Brokerage Commission and Fees
Saxon Parts may receive a brokerage commission, success fee or other remuneration from the seller,
the buyer, or both parties, depending on the individual arrangements agreed with the relevant party or
parties.
All commission arrangements shall be agreed in writing in advance, preferably in the applicable
Vehicle Brokerage Agreement.
Unless otherwise agreed in writing, the brokerage commission becomes due and payable upon the
conclusion of a binding vehicle purchase agreement between the buyer and seller.
Any agreed commission remains payable if the transaction is completed directly between the buyer
and seller following the introduction or brokerage services provided by Saxon Parts.
Additional services, expenses and costs shall be charged separately where agreed in advance.
14.4 Dual Representation
Saxon Parts may act as an intermediary for both the buyer and the seller in the same transaction.
Where Saxon Parts represents both parties, this dual representation and the applicable commission
arrangements shall be disclosed to both parties in advance.
Any consent required under applicable law shall be obtained in writing before Saxon Parts undertakes
brokerage activities for both parties.
14.5 Vehicle Information and Due Diligence
Vehicle descriptions, specifications, photographs, historical information, documentation, ownership details
and other information provided by Saxon Parts are based on information supplied by the vehicle owner,
seller or other third parties.
Unless expressly agreed otherwise in writing, Saxon Parts does not independently guarantee the accuracy,
completeness or authenticity of such information.
Saxon Parts does not automatically provide technical inspections, independent verification of vehicle history,
authentication of originality, valuations or certification of vehicles as part of its standard brokerage services.
The buyer is responsible for conducting their own inspections and due diligence before completing the
purchase, including verification of the vehicle’s condition, provenance, history, originality, documentation a
nd legal status.
14.6 Seller Responsibility
The seller remains responsible for the ownership and legal title of the vehicle, the accuracy of information
supplied, the vehicle’s condition and all representations and warranties relating to the vehicle.
The buyer and seller are responsible for fulfilling their respective obligations under their separate vehicle
purchase agreement.
14.7 Liability
Saxon Parts provides brokerage and intermediary services only and shall not be responsible for defects,
hidden defects, mechanical failures, undisclosed damage, inaccuracies in vehicle descriptions, ownership
disputes or other matters relating to the vehicle itself, insofar as these are not caused by Saxon Parts’ own
breach of contract, negligence or wilful misconduct.
Saxon Parts remains responsible for the proper performance of its own brokerage obligations.
Nothing in this article shall exclude or limit liability where such exclusion or limitation is prohibited
by applicable law.
15. PRIVACY
Saxon Parts processes personal information in accordance with applicable privacy legislation including the
GDPR/AVG. Personal information is used solely for order processing, invoicing, shipping, communication,
fraud prevention, and customer service purposes. Saxon Parts does not sell personal information to third parties.
16. FORCE MAJEURE
Saxon Parts sh.all not be liable for delays or failure to perform resulting from circumstances beyond reasonable
control including supplier shortages, transport disruptions, customs delays, strikes, sanctions, cyber incidents,
natural disasters, governmental measures, or force majeure events.
17. GOVERNING LAW
All agreements, transactions, and disputes shall be governed exclusively by Dutch law. The United Nations
Convention on Contracts for the International Sale of Goods (CISG) is explicitly excluded.
18. INTELLECTUAL PROPERTY & TRADEMARK DISCLAIMER
Saxon Parts is an independent aftermarket and motorsport parts supplier and has no affiliation, association,
authorization, endorsement, or official relationship with Ferrari, BMW, Mercedes-Benz, Lamborghini,
Maserati, FIAT, BOSCH, Magneti Marelli, or any other vehicle manufacturer, brand owner, or automotive
company unless explicitly stated otherwise.
All manufacturer names, vehicle model names, OEM references, trademarks, logos, trade names, and product
images are the property of their respective owners and are used strictly for identification, compatibility, reference,
and informational purposes only.
The use of such names, trademarks, references, or images does not imply any official approval, sponsorship,
partnership, or endorsement by the respective trademark holders.
IMPORTANT NOTICE
Customers are strongly advised to consult a qualified specialist or professional mechanic before purchasing
or installing any product.
Product reference numbers, article codes and part numbers used by Saxon Parts B.V. are for identification
and reference purposes only. These numbers do not necessarily correspond to, or match, original
manufacturer part numbers, OEM references or cross-reference numbers. Any such references are provided
for identification and compatibility purposes only and should not be relied upon as confirmation of
interchangeability or direct replacement suitability.